Spark EDM machine manufacturers: What are the components of the vertical machining center? Factory Suppliers Manufacturers Quotes
  • Home
  • >
  • News
  • >
  • Industry news
  • >
  • Spark EDM machine manufacturers: What are the components of the vertical machining center?

Spark EDM machine manufacturers: What are the components of the vertical machining center?

Spark EDM machine manufacturers: What are the components of the vertical machining center?


I believe many people have heard of CNC horizontal/vertical machining centers and related knowledge of some machine tools, but how much do you know about them?


From the main point of view, the machining center is mainly composed of the following major parts:


First, CNC horizontal / vertical machining center basic components

The basic component is the basic structure of the machining center. It consists mainly of three parts: the bed, the workbench and the column. These three parts not only have to bear the static load of the machining center, but also bear the dynamic load generated during the cutting process. Therefore, the basic components of the machining center must be rigid enough. Usually these three components are cast.


Second, CNC horizontal / vertical machining center spindle components

The spindle components consist of components such as the headstock, spindle motor, spindle and spindle bearings. The main shaft is the power output component of the CNC horizontal/vertical machining center. Its starting, stopping and shifting; the changing direction are controlled by the numerical control system; the rotation precision and positioning accuracy of the main shaft affect the machining center machining accuracy. An important factor.


Third, CNC horizontal / vertical machining center CNC system

The numerical control system of the CNC horizontal/vertical machining center consists of a CNC device, a programmable controller, a servo drive system and a panel operating system. It is the control center for performing sequential control actions and machining processes. The CNC device is a position control system whose control process performs data processing and interpolation calculation based on the input information to obtain ideal motion track information, and then outputs it to the execution unit to process the required workpiece.


Fourth, CNC horizontal / vertical machining center automatic tool change system

The tool change system is mainly composed of a tool magazine and a robot. When the tool needs to be replaced, after the CNC system issues the command, the robot removes the corresponding tool from the tool magazine and loads it into the spindle hole, and then sends the tool on the spindle back to the tool magazine to complete the entire tool change operation.


5. CNC horizontal/vertical machining center auxiliary device

Including lubrication, cooling, chip evacuation, protection, pressure, pneumatic and detection systems. Although these devices are not directly involved in the cutting motion, they are an indispensable part of the machining center. It guarantees the processing efficiency, processing accuracy and reliability of the machining center. Complete the tool change process.


Please feel free to give your inquiry in the form below. We will reply you in 24 hours.
WIRE CUT EDM DIE SINKING EDM CNC MACHINING CENTER SURFACE GRINDING MACHINE