What are the reasons for milling machine manufacturers to analyze the easy break of the milling cutter? Factory Suppliers Manufacturers Quotes
  • Home
  • >
  • News
  • >
  • Industry news
  • >
  • What are the reasons for milling machine manufacturers to analyze the easy break of the milling cutter?

What are the reasons for milling machine manufacturers to analyze the easy break of the milling cutter?

Milling is to fix the blank and use a high-speed rotating cutter to cut the blank and cut out the desired shape and features. The problem of high frequency during milling is the tool problem, which is mainly caused by the easy break of the milling cutter. The following milling machine manufacturers help you analyze the reasons for the easy break of the milling cutter?


The tool problem is mainly manifested in the knives on the rake face, the crevices on the edge, the hot cracks in the blade, the deformation of the cutter teeth, etc. The reason why the cutter with a small diameter is easy to break may be the following: 1. The speed cannot be too slow, 6MM The following knife speeds are between 800 and 1200. When the speed is slow, the knife will be stressed. If the knife is small, it will not be able to withstand much force. There is no good relationship with the quality of 0.2. The amount of the knife should not be too large. When processing, try to use the knife to process the knife several times. The knife has a profit of less than 1 MM, which is related to the hardness of the material being processed, and the material is relatively soft.


Every time the customer comes to the inquiry, the most concerned about the quality of the tool, because in the actual processing, the phenomenon of tool breakage occurs frequently. There are many reasons for the specific occurrence of fracture. In general, the main reason is the improper cutting conditions, the reason of the tool itself: the bottom of the blade is not flat, the blade is not flat, the edge of the blade is collapsed, the crack in the manufacturing of the blade is the second problem: the tool is hit during the cutting process. , crash, the blade has a gap, severe wear and tear does not change the blade, improper selection of cutting parameters, unreasonable use, is an abnormal phenomenon.


Therefore, it is of course important to choose a good tool. If you choose a good tool, you must understand the processing requirements.


Please feel free to give your inquiry in the form below. We will reply you in 24 hours.
WIRE CUT EDM DIE SINKING EDM CNC MACHINING CENTER SURFACE GRINDING MACHINE